close
close
Pay over time with Affirm Learn More

Polaris Ranger/General AFR+ Auto-Tune System GEN 4 by Dobeck

SKU: 732015
$399.95
Or
In Stock: Guaranteed 3 Business Day Delivery

Add a Protection Plan

See plan details

Product Information

SKU: 732015
BRAND: Dobeck
Optimize your Polaris Ranger/General with precision tuning - GEN 4 AFR+ Auto-Tune for ultimate performance.
Read More

Complements All Fueling Solutions

The AFR+ can handle ALL your fueling needs or COMPLEMENT ECU downloads or already installed EFI controllers. The AFR gauge allows you to KNOW exactly how well your tune-up is performing. The EFI fueling allows you to CONTROL any necessary fine tuning without spending more money or valuable time.

Afr Gauge Customization

The AFR gauge has three different customizing options to make the gauge look as good as possible on your vehicle. You can choose two different options for the needle, label, and bezel. The needle can be either orange or white. The label can be either black or a light gray. The bezel can be chrome or black.

Full On-The-Fly Tuning

The AFR+ offers 'on-the-fly' adjustment using three push buttons on the gauge. With power supplied to the unit by either starting the vehicle or just turning the key on, the adjustment modes are accessed by pressing the MODE button. Setting changes are then made for each respective mode by pressing the LEFT (<--) and RIGHT (-->) buttons. No extra tools are required to make tuning adjustments. Any changes made to the mode settings are instantaneously applied even if you are out riding.

Fully Programmable

The AFR+ is programmable using an IrDA adapter. Setups are developed through an online tuning environment called POWERLAB. The AFR+ can be changed to be an add-on fuel trimmer or a complete EFI controller which can run in auto-tune mode.

No Dyno Required

You do not have to be a professional mechanic or tuner and have access to a dynamometer in order to tune your vehicle with the AFR+. The AFR gauge allows you to KNOW exactly how well your tune-up is performing in real world riding situations. The unit breaks down a drive cycle into very understandable zones to make adjustments. Most units have the basic Idle/Cruise, Acceleration, and Full Throttle zones to adjust. Every rider can understand this terminology. The greatest advantage about tuning your vehicle yourself is your ride will be custom set up to your driving style.

Plug-N-Play Installation

All of the offered AFR+ units are plug-n-play installations meaning you do not have to hard wire in any of the electrical components. Most installations do require the welding in of an 18mm O2 bung into your exhaust pipe. Some installations can use the O2 bung already in their pipe and just change out the narrowband sensor with the wideband sensor. The wideband controller requires you to locate the OEM injector connections or a sub-harness connection on your vehicle. Most of the time this will only require you to remove a few components to gain access to these injector connections. A number of new applications will also require you to find the stock narrowband O2 connections on your vehicle if present. Power for the unit is gained through the injector connections and a black ground wire just needs to be attached to the negative terminal on the battery if present or by a metal screw onto the vehicle frame. After physically installing the controller in most cases you are all set to go on a test ride.

Uses Unique Load Based Technology

The controller uses Load Based Technology which sets it apart from most of the competition. Most EFI controllers use what is called 'Alpha-N' Tuning Technology. Alpha-N tuning is associated with just using Throttle Position (TPS) and RPM as the factors to make tuning adjustments. Load Based Technology differs by using Rate, TPS and RPM as the key factors for adjustment. Load Based tuning allows a user to tune their vehicle for every gear and for all riding conditions. Load can easily be explained by stating that riding up a hill puts more "load" on the vehicle than driving on a flat road, but yet the same TPS and RPM can be achieved in both circumstances.

Offers Full Range Tunability

The EFI controller is sold as an Electronic Jet Kit. Like carburetor jet kits of the past the controller offers a range of adjustability to tune your vehicle. Instead of physical jets and needles the controller has this adjustability built into the unit and can quickly be adjusted while riding the vehicle. Essentially with all EFI vehicles software has replaced some hardware. The controller can be installed and set to actually allow the user to still run a stock configuration, but allows the user to ADD or PULL fuel within easy to understand tuning zones.

Does Not Interfere With Stock Ecu Operation

This is a very common feature of all after market EFI controllers, but needs to be stated to reassure all end users. The controller does not trip any engine codes or affect the ECU operation in any way.

Water Resistant

The hardware components within both the gauge and wideband controller are covered with a substance to make the units water-resistant. The parts are still electrical devices and without this coating would short-circuit when in contact with water based substances. The parts are NOT 100% water proof, but will continue to function properly through rainstorms, snow, washing your vehicle, etc.

NOTE:  DO NOT cut any wires or apply dielectric grease to the terminals inside any connectors. Doing so will automatically void the warranty on your AFR+ system.

The controller also does NOT void any OEM vehicle warranty. A common mispractice of dealers is to tell customers certain products will void their newer vehicle's warranty. The Magnuson-Moss Warranty Act protects consumers from this practice.

MODE: GREEN YELLOW RED
GREEN BLUE
YELLOW BLUE
RED BLUE
BLUE LED
FEATURES: GREEN FUEL OPEN LOOP YELLOW FUEL CLOSED LOOP RED FUEL CLOSED LOOP ACCEL PUMP FUEL YELLOW LWR SW PT RED LWR SW PT CLOSED LOOP
  Initial programmed settings and suggested YELLOW and RED AFR target values.
  GRN @ 12.7 (+3) YEL @ 13.2 RED @ 12.8 G/B @ 13 (+0) Y/B @ 11.4 (+16) R/B @ 12.4 (+6)  

AFR+ FEATURE DESCRIPTIONS

Feature Name Description
NONE Feature is NOT enabled and will be skipped over when navigating through features with MODE button.
GREEN FUEL
OPEN LOOP
Feature allows fuel adjustment when the Green zone is active which is typically during idle and very light cruising conditions. Feature is an open loop fueling mode meaning an AFR of 13 is 0% change. To the left adds fuel and to the right subtracts fuel from the stock ECU map.
YELLOW FUEL
OPEN LOOP
Feature allows fuel adjustment when the Yellow zone is active which is typically during cruising conditions. Feature is an open loop fueling mode meaning an AFR of 13 is 0% change. To the left adds fuel and to the right subtracts fuel from the stock ECU map.
YELLOW FUEL
CLOSED LOOP
Feature allows fuel adjustment when the Yellow zone is active which is typically during cruising conditions. Feature is a closed loop fueling mode meaning the system is trying to target the set AFR value.
RED FUEL
OPEN LOOP
Feature allows fuel adjustment when the Red zone is active which is typically during full throttle conditions. Feature is an open loop fueling mode meaning an AFR of 13 is 0% change. To the left adds fuel and to the right subtracts fuel from the stock ECU map.
RED FUEL
CLOSED LOOP
Feature allows fuel adjustment when the Red zone is active which is typically during full throttle conditions. Feature is a closed loop fueling mode meaning the system is trying to target the set AFR value.
YELLOW
LWR SW PT
Feature allows adjustment of when the Yellow zone engages. Needs to be set so the Yellow zone is on during all cruising conditions.
RED
LWR SW PT
Feature allows adjustment of when the Red zone engages. Needs to be set so the Red zone is on during all full throttle conditions.
ACCEL PUMP
FUEL
Feature allows fuel adjustment when the Accel Pump is active. Feature targets quick movements of the throttle and adjusts fuel based on the rate of change. Feature is an open loop fueling mode meaning an AFR of 13 is 0% change. To the left adds fuel and to the right subtracts fuel from the stock ECU map.
CLOSED LOOP
SWITCH PT
Trim code feature which determines the transition point to allow the hard set auto-tune values to run in closed loop. Setting of 10.5 or +25 will engage closed loop. Setting of 15.5 or -25 will turn-off closed loop and adjust fuel based on the open loop adjustments.

KIT CONTENTS:
  DP AFR Gauge
  Bosch LSU 4.2 O2 Sensor #17018
  DP Dash Mounting Hardware
  DP Wideband - 2CHST YER2
  DP Battery 44 in Sub-Harness
  DP Flat O2 bung
  DP O2 Bypass OX-025
  Production Code: Adjustable AFR Code

Product Fitment

Full-Size Vehicle (7)
Crew Vehicle (6)
General Vehicle (13)

Questions & Answers

Reviews

Everything Polaris Ranger offers a VIP experience for all customers

Our Polaris Experts are standing by, ready to answer questions or go into more detail about the features and benefits of this product, help you to explore similar or complementary products, confirm vehicle fitment and more.

Experience The Everything Advantage

  • 100% Satisfaction Guarantee
  • Personalized Expert Service
  • Huge In-Stock Inventory
  • Always Secure Shopping
  • $12.95 Flat Rate Shipping*

Contact Us Today!

Phone: (920) 214-8135 - Mon-Fri 8:00AM - 6:00PM CST, Sat 9:00AM - 3:00PM CST
Email: customerservice@everythingpolarisranger.com
Text: (920) 644-5280

Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.