Polaris Ranger SP570/500/570/EV Rear Windshield by EMP

2015-2026+ Polaris Ranger Mid-Size SP 570 / 570 / 500 Hard Coated Rear Dust Stopper by Extreme Metal Products

Anybody who has driven a mid-size Polaris Ranger down a dry gravel road knows what happens next — the dust rolls up behind the machine, curls over the bed, and lands right in the back of the cab. This Extreme Metal Products rear dust stopper closes off the open back of your Ranger with a panel of 3/16" hard coated polycarbonate, so the dirt, rain, and wind stay outside where they belong. It bolts to your factory PRO-FIT cage with the included brackets and thumb screws, and it comes back off in a couple of minutes when you want the airflow again. Most Ranger owners never run a UTV rear windshield, and they are usually surprised how much cleaner the ride gets once they do.

Key Features

• Hard coated polycarbonate on both sides for real scratch resistance — not bare plastic that hazes over after a few washes
• 3/16" thick panel that shrugs off branches, kicked-up stone, and trail debris
• Mounts to the stock PRO-FIT cage with included brackets and thumb screws
• Comes off in minutes with no tools — back out the thumbscrews and lift it away
• All mounting hardware and brackets are in the box
• Clear panel keeps your view out the back wide open for backing up and watching a trailer
• Made in the USA
• Pairs with the EMP aluminum top (P/N 12736 EMP SP570 Roof) and EMP hard coated windshield (P/N 12711 EMP Front Windshield- SP570) to close the cab in front, above, and behind

Fitment Notes

• Cage requirement: fits mid-size / 2-seat Polaris Ranger models with the PRO-FIT cage — 50" wide across the top of the cage, non-round tube
• Ranger SP 570 (Mid-Size): 2023-2026+
• Ranger 570 (Mid-Size): 2015-2017
• Ranger 570 (2-Seat): 2016-2022
• Ranger 500 (2-Seat): 2016-2022
• Ranger ETX (Mid-Size): 2015
• Ranger EV and EV LI-ION (Electric): 2015-2022
• Will NOT fit the Full-Size Ranger 570 or any machine without the 50" PRO-FIT cage
• 2017 and newer drilling note: Polaris added a side bar to the cage on 2017 models, so one clamp location may need a hole drilled. It takes a standard 1/4" drill bit and about two minutes.

Specifications

• Material: hard coated polycarbonate, coated both sides
• Thickness: 3/16"
• Mounting: bracket and thumb screw, no permanent modification to the cage
• Included: panel, all brackets, all mounting hardware
• Origin: Made in the USA
• Part number: 12712

Real Life Value and Uses

• Cut the dust on gravel and two-track. A rear panel stops the low-pressure pocket behind the cab from pulling your own dust cloud back in on you.
• Stay dry in a chasing rain. Rain that blows in from behind soaks the seat back and the small of your back — this closes that gap.
• Hunt more comfortably. Ride to the stand without a face full of grit, then pull the panel in a couple of minutes when it is time to load gear through the back.
• Push snow in real comfort. Add the rear dust stopper to a top and windshield and the cab holds heat instead of scooping cold air off the bed.
• Keep the farm chores cleaner. Feed dust, lime, sawdust, and grass clippings stay in the bed instead of coating the seats.
• Protect passengers and dogs from debris kicked up off the bed on rough ground.
• Keep it seasonal. Run it fall through spring, take it off in summer for airflow, and store it flat — no tools either direction.

Why Choose Extreme Metal Products

• EMP builds its own side by side parts in Cleveland, Ohio, and this rear windshield is made in the USA
• Panels are cut for a specific cage — the mid-size PRO-FIT platform — instead of a universal panel you trim and hope fits
• The both-sides hard coat is the detail budget panels skip, and it is what keeps the plastic clear after a season of washing and brushing
• Thumb screw mounting respects the machine: no cutting the cage, no drilling into your Ranger to add a panel you may want off in July
• A matched EMP top and windshield are available for the same cage, so the cab goes together as a system that lines up
• Backed by a nationwide dealer network for support after the sale

Close in the back of your mid-size Ranger and enjoy a cleaner, drier ride — order part number 12712 today, and reach out to our team if you want a second set of eyes on your cage before you buy.

Extreme Metal Products Rear Ranger Windshield Care 12712 Instructions:-

• Create a mixture of mild liquid dish soap and warm water (Recommended UTV windshield washing/cleaning solution)
• Or use Pre-made Polaris Ranger windshield solution option: 13946
• Take your side by side windshield cleaning solution and wash the UTV window(s), interior, and exterior
• Only use a clean soft, micro-fiber cloth to wipe gently and do not scrub- apply very light pressure ***Do not use a paper towel and Windex***
• Rinse UTV windshields well and air dry
• Let dry for at 30 minutes to 2 hours depending on the humidity level of your location
• Get on that machine and have an awesome time now that you can see!!!
• Stay safe while riding out there and check out Everything Polaris Ranger for more UTV parts and accessories