SKU:
108-1086-EPR
BRAND:
Aftermarket Assassins
Fits 2018-Up STD Cab Models & 2019-Up Crew Cab Models with the New Body Style.
- 2022+ Northstar Editions: These use a larger crankshaft taper which we have clutches for, just note they are slightly different, so make sure you know your exact year when ordering. These models will includes 3 inner clutch cover bolts which provide more clearance.
- **Does NOT fit Ranger 61HP Single Cam Models - See our Single Cam section**
- From trail rigs to high horsepower setups, this is the only clutch we will run on our shop vehicles.
- This kit includes our complete heavy duty AA primary clutch. This clutch is the same design found on the 2016-2020 RZR Turbo models with an encapsulated tower design. We found this clutch to hold power better, hold up better (no exploding), and slip the belt less. It simply meets the demands of these high horsepower vehicles, and is proven. This clutch also holds belt grip better than billet clutches, especially at higher RPM. This primary clutch is our own version made with higher grade tool steel for the post and now assembled with AA HD sliders to our AA specifications along with our Revolver Billet Clutch Cover with Tower Lock for even more strength and airflow.
- With this clutch you'll notice better power transfer (better acceleration) and lower belt temps than your OEM P90X clutch or any other aftermarket clutch
- This is a non-EBS primary clutch. The stock P90X had EBS issues and we have not seen a noticeable difference in engine braking between the two setups.
- Kit Includes: AA Primary Clutch w/AA Revolver Billet Clutch Cover with Tower Lock, Primary Bolt, AA magnetic adjustable clutch weights, weight setup sheet, AA primary spring, custom Primary Limiter, and now includes AA Extreme Heavy Duty primary sliders (comes installed on clutch).
- Clutch does not come assembled. Simply set up your weights according to our setup chart, then install the weights & spring. Otherwise we have the +$25 option to have us assemble the primary clutch for you, as long as you let us know what engine modifications and tire size/type.
- This item is for those that already have our AA clutch kit and want to upgrade the primary clutch. If looking for the clutch + secondary components, that kit is listed separate.
- Must be used with AA secondary spring (or AA spring + AA helix).
- Clutch Puller Note: You will need the P90X clutch puller to remove your OEM clutch. The AA clutch uses the standard XPT/XP 1000 primary clutch puller.
- Have alignment issues? Use our P90X Secondary Clutch Alignment Shim Kit to set things straight
- 2018 STD Cab Only Models Part Number: 108-1059
- 2019-21 All Models Part number: 108-1059
- 2022+ All models EXCEPT Northstar Part Number: 108-1059
- 2022+ Northstar Models w/Large Taper only Part Number: 108-1086
