A UTV light bar is one of the best ways to add some extra brightness to your Mid-Size Polaris Ranger. Light bars for the Polaris Ranger Mid-Size are popular because they are easy to install, they come in a variety of lengths, and they can be mounted in several different locations both on the inside and outside of the vehicle's cab. The roof of a Mid-Size Ranger is a great place to mount a side-by-side light bar, as there are several flat surfaces on which brackets can be bolted. The width of most Mid-Size Ranger roofs allow for 20" light bars, 30" light bars, and even 40" light bars to be installed without any overhang, and we've even seen guys push the limits with 52" light bars. You can mount light bars on top of the roof, but in a bid to avoid low branches, many riders choose to mount them just under the roof and above the operator's line of sight for extra protection. Aside from the roof, the hood is another option for mounting a light bar on the Polaris Ranger Mid-Size. If you're running a windshield-less setup, you can place the light bar close to the cab, but if you do have a windshield, depending on what kind you use, other locations might be better to mount your light bar.
Installing a light bar on the roof or hood of your Ranger 570 Mid-Size, Mid-Size 800, or other Mid-Size Ranger is great for applications such as plowing, where the light can shoot over the plow and onto the ground ahead when the plow is in its uppermost position. However, you can also fix forward-facing light bars onto many aftermarket bumpers. Some have predrilled holes for this very purpose, while others have to be worked on a bit to facilitate a light bar. Need some illumination when reversing? You can even put a light bar on the back of your rig so you always know what's behind you. No matter what size of light bar you're after and regardless of where you're wanting to mount it. Here at Everything Polaris Ranger, our selection of UTV light bars for the Mid-Size lineup of Polaris Rangers is unbeatable.