Polaris Ranger Complete Snow Plow Kit by KFI

Polaris Ranger Complete Snow Plow Kit by KFI

Clear your driveway or move gravel, dirt, and debris faster and easier than ever with this easy-to-install Snow Plow Kit! KFI utilizes top-grade steel and quality components to ensure years of reliable performance.

Kit Includes:

• (1) Plow Blade: Your choice of size and material.
• (1) UTV Pro 2.0 Push Tube
• (1) Vehicle-Specific Mount: Please ensure you select the correct vehicle model above.

Important Notes:

• Winch Not Included: This kit does NOT include a winch or winch mount.
• Hitch Compatibility: Most Ranger plow mounts include a lower 2" receiver hitch; however, some Ranger models and all General models do not.
• Bumper Requirements: Requires a stock front bumper.
• Rubber Flap: 60" Pro-S blades do not include the 2-ply top rubber flap; it must be purchased separately.
• Edition Restrictions: Does NOT work with High Lifter or Waterfowl Editions.
• Glacier Bumpers: If you have a Glacier Bumper installed, you will need a Glacier Adapter.

Premium Build Quality:

• 100% Made in the USA.
• Superior Finish: Components are metal bead-blasted before powder coating for maximum durability and a professional finish.
• Easy Setup: Complete installation instructions and all mounting hardware are included.

UTV Plow Blades:

• • Straight Steel Blade (Pro-S Series)

• • • Available Sizes: 
      • 60" ATV / UTV Pro-S Series Plow Blade (Straight) - #105060 - (75 lbs.)
      • 66" UTV Pro-S Series Plow Blade (Straight) - #105066 - (81 lbs.)
      • 72" UTV Pro-S Series Plow Blade (Straight) - #105072 - (85 lbs.)
    • Versatility: Pushes snow straight ahead or angles up to 25 degrees to either side.
    • Design: 16” vertical face (21” with flap). 66" and 72" models include a 7" 2-ply rubber flap.
    • Construction: 11-gauge steel blade with 3/16" Grade 50 ribbing and a 2-sided steel wear bar.
    • Hardware: Heavy-duty 3" diameter Grade 50 steel skid plates and Grade 8 bolts.

• • Poly Blade (Pro-Poly Series)

• • • Available Sizes:
      • 60" ATV / UTV Pro-Poly Series Plow Blade - #105860 - (81 lbs.)
      • 66" UTV Pro-Poly Series Plow Blade - #105866 - (82 lbs.)
      • 72" UTV Pro-Poly Series Plow Blade - #105872 - (87 lbs.)
    • Superior Moving: Dual-curvature face designed for maximum snow displacement.
    • Design: 21” vertical face (27” with flap). All sizes include a 7" 2-ply rubber flap and plow markers.
    • Construction: Flexible heavy-duty black poly face with a 3/16” Grade 50 steel frame.
    • Hardware: Heavy-duty 3" diameter Grade 50 steel skid plates and Grade 8 bolts.

Pro 2.0 UTV Push Tube (#106300)

• Enhanced Lift: Front-mount design offering 30"+ of lift height.
• Heavy Duty: 1-1/2" 12-gauge square steel tubing with 1/4" thick pivot bushings.
• Easy Adjustments: Features an easy-pull pin for blade angle adjustment and 6 five-degree blade pitch adjustments.
• Smooth Rotation: 6" diameter POM injection-molded rotator bushing.

Vehicle-Specific Front Mount:

• Front-Mount Design: Optimized for high ground clearance and easy attachment.
• Heavy-Duty Steel: Base plate is laser-cut from 3/16" Grade 50 steel for maximum strength.
• Reinforced Tabs: All pin tabs feature 1/4" thick Grade 50 steel to prevent bending under pressure.
• Trail-Ready: All plow tabs are tapered to reduce hang-ups and snagging while trail riding.

• Note: Physical mount design may vary slightly based on your specific vehicle model.

Optional Add-Ons

4500lb Winch Kits (Standard UTV Series)

• Kit inclusion:
• Steel Cable
• Handheld 14' Corded Remote(ATV-HR)
• UTV Dash Rocker Switch (UTV-DRS-K)
• New Heavy Duty Electric Contactor (ATV-CONT)
• Cable lengths:
• Standard (#U45-R2): 38' steel cable.
• Wide (#U45w-R2): 52' steel cable.

Quick Plow Pulley & Soft Strap (106680/106470)

• Purpose: Designed specifically for use with steel cable winches to improve lifting leverage and reduce wear on the cable and winch motor.
• #106680 Quick Plow Pulley - Steel Cable : Specifically designed for the KFI UTV Plow System, this pulley features a large 2-1/8" steel wheel that prevents cable damage while improving lift geometry to reduce electrical strain and provide smoother, more controlled operation.
• #106470 12" Soft Strap : This USA-made 12-inch soft strap features 1.20-inch wide heavy-duty webbing with a 3,200 lb break strength.

Winch Mount (#101830)

• Constructed of 3/16" Grade 50 steel; powder-coated black.
• Mounts the winch securely behind the front bumper.

• Note: Recommend purchasing the Polaris 3-pin wire harness (#101505).

Hydraulic Actuator (Angle) Kit

• Effortlessly angle your blade from the cab using a Carling Technologies dash switch.
• Includes 12V Parker Industries hydraulic cylinder and full wiring kit.
• Kit Comparison:

• • Hydraulic Angle Kit for Machine with Tires  (106305/106940/ACT203)

• • Hydraulic Angle Kit for Machine with Tracks  (106335/106940/ACT203) - Requires UTV Track Extension (106330), must be purchased separately

Leveling & Extension Kits

• Track Extension (#106330): Extends the blade 10.33” for machines with tracks.
• Push Tube Leveling Kits: Allows mounting of push tube at the correct height so the blade is level.
• 1" Negative SQ Push Tube Leveling Kit (106320) - For machines 8.5"-9.5"
• 1"- 2" UTV SQ Push Tube Leveling Kit (106322) - For machines 11.5" - 14"
• 4" Positive UTV SQ Push Tube Leveling Kit (106324) - For machines 14"-16"
• 6" Positive UTV SQ Push Tube Leveling Kit (106326) - For machines 16"-18"

Accessories

• Side Shields: Made of 3/16” powder-coated black Grade 50 steel, these extensions add width to the blade while reducing snow and dirt overflow.
• Pro-S Side Shield - Tapered Wing for Standard Blade (105540) -- Adds 2-1/4” Width to size of blade per Shield
• Pro-Poly Tapered Side Shield - Driver Side (106110) -- Adds 5.6” Width to size of blade per Shield
• Pro-Poly Tapered Side Shield - Passenger Side (106115) -- Adds 5.6” Width to size of blade per Shield
• Plow Markers: Bolt easily to blade ends for maximum visibility and safety.
• Standard Blade Plow Marker Kit (105640) - has a steel 89-degree angled base ; 15.5" length  0.5 " diameter
• Pro-Poly Plow Blade Marker Kit (105810) - has a straight base
• Snow Flap Kits: This two-way adjustable kit features a durable 11-gauge steel strip and a 6.5-inch rubber flap for easy, bolt-on installation on all pre-drilled KFI blades.

• • • 60" Snow Flap (105144)

• • • 66" Snow Flap (105835)

• • • 72" Snow Flap (105290)