Polaris Ranger Complete Snow Plow System by KFI Products
Clear your big driveway or move gravel, dirt, and more faster and easier than ever by adding this easy-to-install Snow Plow Kit! KFI uses only top-grade steel construction and quality-made components for year after year of reliable plowing.
Kit includes:
- (1) Plow Blade (your choice of size)
- (1) UTV Push Tube
- (1) Vehicle Specific Mount (make sure to select your correct vehicle above)
Important Notes:
- Does NOT include winch or winch mount
- Most Ranger Plow Mounts include lower 2" Receiver Hitch, some Ranger models and All General models do not
- Requires Stock Front Bumper
- 60" blades do not include 2-ply top rubber flap, must be purchased separately
- Does NOT work with all High Lifter Editions or Waterfowl Editions
All Plow Components Feature:
- Complete installation instructions included
- All mounting hardware included
- Powdercoated for maximum durability
- Unlike all other Plow competitors, our components are metal bead blasted before they are powder coated for the best possible finish prep.
- 100% Made in the USA
Straight Blade Specifications:
- Available sizes:
- 60" ATV / UTV Pro-S Series Plow Blade (Straight) - #105060 - (75 lbs.)
- 66" UTV Pro-S Series Plow Blade (Straight) - #105066 - (81 lbs.)
- 72" UTV Pro-S Series Plow Blade (Straight) - #105072 - (85 lbs.)
- Pushes snow straight ahead or to the sides up to 25 degrees
- Added gussets for the wider width
- The 66" & 72" blades include a 7" high 2-ply top rubber flap
- Measures 16” Vertical blade face height with an approximate 21” height with snow flap
- Fully-adjustable blade skids with bolt-on brackets
- Heavy duty 3"-diameter grade-50 steel skid plates
- Blade Constructed of 11 ga steel
- 3/16" Grade 50 Ribbing for a strong bolt-up to the Swivel Tube
- 2-Sided 3/16" x 3.00" Grade 50 Steel Wear Bar
- Wear Bar attached with Heavy Duty Grade 8 Bolts
UTV Poly Blade Specifications:
- Available sizes:
- 60" ATV / UTV Pro-Poly Series Plow Blade - #105860 - (81 lbs.)
- 66" UTV Pro-Poly Series Plow Blade - #105866 - (82 lbs.)
- 72" UTV Pro-Poly Series Plow Blade - #105872 - (87 lbs.)
- Includes a 7" high 2-ply top rubber flap
- Dual Curvature face for supreme snow moving
- Measures 21” Vertical blade face height with an approximate 27” height with snow flap
- Fully-adjustable blade skids with bolt-on brackets
- Heavy duty 3"-diameter grade-50 steel skid plates
- Flexible Heavy Duty Black Poly face
- 3/16” Grade 50 Steel Rib and Frame construction
- 2-Sided 3/16" x 3.00" Grade 50 Steel Wear Bar
- Wear Bar attached with Heavy Duty Grade 8 Bolts
- Works with KFI ATV & UTV Tubes
- Includes Plow Markers
Pro 2.0 UTV Push Tube (106300):
- Improved Manufacturing
- Easier Install for All Plow Accessories
- Added 2.5" Of Overall Length
- Works With All KFI Plows
- Front Mount Design with 30"+ of lift height
- Heavy Duty 1-1/2" 12 Gage Square Steel Tubing
- Heavy Duty 1/4" Thick 1-1/2" Diameter Grade 50 Pivot Bushings
- 6" Diameter POM Injection Molded Rotator Bushing
- Easy-Pull Pin Blade angle adjustment
- Multi-position Plow Lift Bracket
- 6 five-degree blade pitch adjustments
- 3 blade angle positions that rotate the blade up to 25 Degrees
Model Specific Plow Mount:
- Front-Mount System
- Plate constructed from 3/16" Grade 50 Steel
- All Pin Tabs are constructed from 1/4" Thick Grade 50 Steel
- All Plow tabs are tapered to help reduce hang-ups while trail riding
** Actual Plow Mount may look different than reference photo shown **
OPTIONAL ADD-ONS
4500lbs Winch Kit:
- Standard (#U45-R2) - 38' Steel Cable #UTV-CBL-4K
- Wide (#U45w-R2) - 52' Steel Cable #UTV-CBL-4K
- Kit inclusion:
- Steel Cable
- Handheld 14' Corded Remote(ATV-HR)
- UTV Dash Rocker Switch (UTV-DRS-K)
- New Heavy Duty Electric Contactor (ATV-CONT)
Polaris Ranger Winch Mount (101830):
- Constructed of 3/16" Grade 50 steel
- Powder coated black for supreme durability
- Very easy to install
- Mounts winch tucked back behind front bumper
- Satisfaction guaranteed
- Roller fairlead and winch are NOT included
- ** It is recommended that you also purchase the Polaris wire 3-pin harness (101505)
Hydraulic Actuator (Angle) Kit:
- Specifically designed for use with KFI UTV Pro 2.0 Push Tubes #106300 / Open Trail Tubes #10-6300
- Parker Industries Made in the USA Electric (12 volt) over Hydraulic Cylinder
- Complete wiring kit with Carling Technologies Two-Way Dash Rocker Switch
- Powder Coated TOUGH
- Does NOT include the Tube System #106300 (Purchase separately)
- Hydraulic Angle Kit for Machine with Tires (106305/105940/ACT203)
- Hydraulic Angle Kit for Machine with Tracks (106335/105940/ACT203) - Requires UTV Track Extension (106330), must be purchased separately
UTV Plow Tube Track Extension (106330):
- Designed to work with KFI UTV Tubes (106300 & 105635) and KFI CC Conversion Push Tubes (106310 & 105905)
- Constructed of Heavy Duty 1/4” Grade 50 Steel
- Extends UTV Blade 10.33”
- Shot Blasted before powder coating; Powder Coated TOUGH - Black
- Replacement for #105565
Plow Markers:
- Increase your blade end visibility for added safety
- Bolts to the side/ends of your blade
- Includes two markers
- Standard Blade Plow Marker Kit (105640) - has a steel 89-degree angled base ; 15.5" length 0.5 " diameter
- Pro-Poly Plow Blade Marker Kit (105810) - has a straight base
Flap Kit:
- 11-Gauge Steel Adjustable Snow Flap Edge Strip
- 6.5” 2-3ply Rubber Flap (acts as a snow flap as well as an extension to the plow blade)
- All KFI Blades are Pre-Drilled
- Two-way Adjustable
- 60" Snow Flap (105144)
- 66" Snow Flap (105835)
- 72" Snow Flap (105290)
Side Shield:
- Attaches to the ends of the plow to help reduce snow and dirt overflow
- 3/16” Grade 50 Steel Powder Coated Black
- Pro-S Side Shield - Tapered Wing for Standard Blade (105540) -- Adds 2-1/4” Width to size of blade per Shield
- Pro-Poly Tapered Side Shield - Driver Side (106110) -- Adds 5.6” Width to size of blade per Shield
- Pro-Poly Tapered Side Shield - Passenger Side (106115) -- Adds 5.6” Width to size of blade per Shield
UTV SQ Push Tube Leveling Kit:
- Allows mounting of push tube at the correct height so the blade is level.
- Works with KFI UTV SQ Push Tubes (106300)
- Shot Blasted before powder coating ; Powder Coated TOUGH - Black
- 1" Negative SQ Push Tube Leveling Kit (106320) - For machines 8.5"-9.5"
- 1"- 2" UTV SQ Push Tube Leveling Kit (106322) - For machines 11.5" - 14"
- 4" Positive UTV SQ Push Tube Leveling Kit (106324) - For machines 14"-16"
- 6" Positive UTV SQ Push Tube Leveling Kit (106326) - For machines 16"-18"