Introducing the first-ever 100% Plug & Play UTV running light you can mount effectively anywhere on your SxS. With an Unlimited Lifetime Warranty and custom vehicle-specific wiring for more than 35 different UTV models, Apex Lights™ have raised the standard for UTV accent lighting.
Here’s an overview of what you get with the White/Amber Apex Lights™:
- Two Apex Lights. IP67-Rated, 100% waterproof and dustproof
- Custom Plug & Play wire harnesses for the Ranger
- Multi-Mount Hardware: mount Apex Lights™ to any flat body panel, roll cage, roof or bumper
KEY SPECS
- Brighter than Polaris OEM running lights
White Apex Lights™ = 300% Brighter. Amber = 75% Brighter - 54 LEDs in each light, with perfectly diffused light output (no LED diode “hot spots”)
- Heavy-duty, impact-ready and scratch-resistant polycarbonate lenses
- Aluminum heat-sink frame
- Extreme lighting efficiency: 2 Amps per pair of Apex Lights™
WATERPROOF & DUSTPROOF. EFFECTIVELY INDESTRUCTIBLE
The Ranger Apex Lights™ are IP67-rated, 100% waterproof and dustproof lights. Each light has a smoked polycarbonate lens built to withstand 2,600 pounds of pressure per square inch.
PERFECTLY DIFFUSED LIGHT OUTPUT
The Ranger Apex Lights™ are engineered to display perfect LED diffusion. That means Apex Lights™ throw off a perfectly consistent, clean beam of light with no LED diode “hot spots”.
LIGHTING CUSTOMIZATION & MOUNTING OPTIONS
Apex Lights™ unlock a new level of UTV customization and safety. RAVEK’s Multi-Mount hardware (included in every kit) allows you to mount Apex Lights effectively anywhere on your UTV, including:
- Exterior Body Panels (front and/or side panels)
- Roll Cage
- Roof
- Bumpers
Each Apex Lights™ kit includes two custom RAVEK roll-bar mount adapters and two heavy-duty waterproof straps, so you can choose between either a flat surface or roll-bar mounted installation on any 1.25” – 2.5” roll bar or bumper.
Each kit also comes with hardware so you can choose between a no-drill or drill-mounted installation.
ADD LIGHT HIGHER UP ON YOUR UTV
The original concept behind the Apex Lights™ was to create running, brake, and turn lighting that we could mount high up on our UTVs. We mount a few pairs of Apex lights high up on each of our machines – they dramatically increase visibility and make our machines easy to pick out of a group.
EXTREME LIGHTING EFFECIENCY
With only 2 Amps of draw per pair of Apex Lights, you can mount as many Apex Lights™ as you want to give your SxS a truly custom look.
If you have an aftermarket UTV Turn Signal Kit installed, you can sync up to 3 pairs of Apex Lights to your turn signal kit controller box.
Overview:
- Mount Anywhere: Roof, Panel, Bumper, Cage
- IP67 Waterproof & Impact-Ready
- Truly Plug & Play DIY Installation
- Unlimited Lifetime Warranty
Features:
- Brighter Than OEM Accent Lights : Take on dust and low-visibility conditions with confidence. Each Apex Light™ blasts ultra-bright light through their durable, 8” rigid polycarbonate lenses. The white are 3x brighter than Ranger stock accent lights, with amber being 75% brighter.
- Customized To You With Next-Generation Diffused LEDs : Mount to ANY flat surface or 1.25”-2.5” roll bar, including bumpers. Seriously. And the “easiest install in lighting” is fully Plug & Play for the Ranger ’17-18’ models in under 30 minutes with no drilling required. Add multiple sets on your roof, bumper, door or wherever else you can imagine. Custom diffusion panels deliver a clean, futuristic look.
- Rugged, Nearly Indestructible Formed Lights : IP67-rated with heavy-duty polycarbonate lenses, aluminum heat-sink frames, and premium waterproof wiring make these lights ready for anything. We’ve rolled our UTVs and knocked them into trees at speed without leaving even a scratch on the Apex lights. Seriously. But try to avoid rolling please.
Specifications :
- Waterproof Rating : IP67
- Amperage : 0.25A - 1.1A
Raw Lumens :
- White 1,512
- Amber 1,080
- Red 378
- Watts : 10.5 - 15.4
- Temperature Rating : -40° F - 140° F
- The hottest temperature recorded on Earth is 134.1° F on July 10, 1913 in Death Valley.
- Weight (oz.) : 4.2
- Size : 7 7/8" L x 7/8" W
Installation Options:
- Plug & Play Harness
- Roll Bar Mount
- Adhesive Mount
- Drill or No-Drill
