SKU:
558025-X-EPR
BRAND:
Bercomac
Snowblower Features:
- Motor is installed in the middle for a perfect balance (requires motor between 13HP to 23HP with horizontal crankshaft of 1").
- For 2-Cylinder Honda motors with Horse Power of 20 HP to 24HP, they need Bercomac exhaust silencer, for example ; No. Kimpex : 089269 cause the Honda exhaust silencer does not match.
- Blower opening: 54" wide x 21" high.
- The sub frame attaches to the rear of the UTV on the hitch ball.
- Extendible Frame: 4.75" wide frame is adjustable to different lengths: 73" to 112".
- Weight may be transferred to the suspension of the vehicle for better manoeuvrability.
- Electrical control box included: adjust chute, engage clutch, and stop your engine, all from your seat.
- 3 shear bolt safety system.
- Reduction: single belt system (type "BX 55" belt) assures a long life span.
- Electric clutch engages snowblower instantly.
- Bigger wheels for better adaptability to any kind of terrain.
- Weight: 245 lbs without motor.
SubFrame Extension:
- The subframe extension is required when the measurements from the furthest point in the front of the vehicle to the rear ball hitch is Longer than 106″. **Blower will not fit if measurements are longer than 143″.
- When it comes to choosing the correct Bercomac blower, customers will also need to consider the width. The appropriate Bercomac blower should be wider than the tire tracks to work properly.
Note:
- If EPA is applicable in your area, be sure to choose a snowblower that respects it.
- The subframe extension is required when the measurements from the furthest point in the front of the vehicle to the rear ball hitch is Longer than 106
- Will not fit if measurements are longer than 143
