Polaris Ranger SP570/500/ 570 40" LED Light Bar Bracket Set by EMP

2015-2026+ Polaris Ranger Mid-Size SP 570 / 570 / 500 40" LED Light Bar Bracket Set by Extreme Metal Products

Mounting a light bar on a mid-size Polaris Ranger usually means somebody drilling a hole in a cage they paid good money for, or a set of universal clamps that walk loose by the second season. This Extreme Metal Products bracket set does neither. The brackets clamp directly to your PRO-FIT cage — no cutting, no drilling — and hold a 40" LED light bar up where it belongs. Read this part before you order: this listing is the bracket set only. The light bar is not included.

Key Features

• Mounts a 40" LED light bar to the PRO-FIT cage on a mid-size Ranger
• No drilling and no cutting — the brackets clamp to your existing ROPS
• Sold as a complete set, driver's side and passenger's side
• Works with factory tops, so you do not have to pull your roof to run a bar
• Works with some flip-up windshields — check yours for clearance before ordering
• Brackets flex roughly 3/16" per side, which gives you room to seat a bar that is not dead-on nominal
• Fabricated in Cleveland, Ohio
• Bracket set only — light bar and wiring are separate

Fitment Notes

• Cage requirement: mid-size Polaris Ranger with the PRO-FIT cage
• Ranger SP 570 (Mid-Size): 2022-2026+
• Ranger 500 and 570 (Mid-Size): 2015-2021
• Ranger EV: 2015-2018
• Light bar sizing matters here. These brackets are built for a bar measuring roughly 40-3/4" to 41" overall. Measure your bar end to end, not by what the box calls it — "40 inch" bars vary between brands.
• Flip-up windshields: some clear these brackets and some do not. If you run one, check your clearance or reach out to our team before ordering.

Specifications

• Light bar size: fits approximately 40-3/4" to 41" overall length
• Adjustment: about 3/16" of flex per side
• Mounting: clamps to PRO-FIT cage, no drilling or cutting
• Quantity: sold as a set (driver and passenger side brackets)
• Included: bracket set only — does not include an LED light bar
• Origin: fabricated in Cleveland, Ohio
• Part number: 14726

Real Life Value and Uses

• Feed and check stock before daylight. A 40" bar turns a dark lot into a work area, and the factory headlights on a mid-size machine were never meant for that.
• Plow snow at 5 a.m. when the drive has to be open before anybody leaves the house.
• Find a cow, a gate, or a fence break after dark without holding a flashlight and steering with your knee.
• Light up a job site and keep working past sundown instead of packing it in.
• Ride trails at night with real light out front instead of stock lighting that quits about where the trail turns.
• Keep your cage the way it came. No drilled holes means nothing to rust and nothing to explain when you trade or sell the machine.
• Take it off in a few minutes if you want the bar and brackets gone for the season.

Why Choose Extreme Metal Products

• EMP fabricates these brackets in Cleveland, Ohio, cut for the PRO-FIT cage specifically instead of a universal clamp that fits everything about halfway
• Clamping to the ROPS keeps a stock cage stock — no drilling into structure, no rust starting at a hole you cut
• The built-in flex is honest engineering: light bar tolerances vary between brands, so the bracket gives you a little room to work with
• Designed to live alongside a factory top instead of forcing you to choose between a roof and a light bar
• EMP offers 40" light bars as well, so the bar and brackets can come from the same shop and match up
• Backed by a nationwide dealer network after the sale

Get your light bar mounted right, with no holes in your cage — measure your bar, then order bracket set 14726 today and reach out to our team if you want your setup checked first.