Product Description
All new High Lifter APEXX Control Arms are stronger, adjustable and engineered for the most punishing terrain with 1.75" of additional ground clearance and raked forward 1.5". Push your machine to the limits and tackle obstacles you couldn't before! This kit includes a complete APEXX heavy duty tie rod kit.
These control arms are designed specifically for the Polaris General 1000 XP, offering enhanced durability and performance. Optional preinstalled ball joints are available for added convenience.
Features
- Adjustable heat-treated collars for camber adjustability with a 1” thread
- Raked forward 1.5"
- Over 3 degrees of camber adjustment in each direction
- Heavy duty ball joint brackets to eliminate deformation issues, High Lifter HD Ball Joint Compatible
- Ladder bar compatible with the 1.5” ID clamps
- Extreme duty 1.5” x .120” DOM steel construction
- Up to 1.75” of added ground clearance compared to OEM lower arm
- Utilizes High Lifter’s new brake line clamps for securing brake lines to control arms
- Optimized sway bar linkage angles
- Includes upgraded heavy duty inner and outer tie rods with heim joints and alignment cones
- Limited Lifetime Warranty (Excludes wearable items like bushings, bearings, cones, and heim joints)
- Powder Coated
Heavy Duty Strength
High Lifter’s new heavy duty control arms provide additional support compared to factory arms. Both the upper and lower control arms are made from the same robust material, offering increased strength and resistance to damage. Constructed from 1.5” DOM with .120 wall tubing, these arms are significantly more durable than stock components.
Built in Adjustability
The bushing collars on the lower arms allow for adjustability to prevent premature wear caused by lift kits, portals, or larger tires. Heat treated and plated adjustable bushing collars provide strength and reliability. This kit comes preadjusted to the factory position and uses factory bushings and caps for installation.
Increased Ground Clearance
By strategically arching the lower control arm with double and triple bends, we have maximized ground clearance, adding an extra 1.75” to help you navigate challenging terrain. This design maintains factory geometry, reducing wear on axles and tie rods. The forward arms enable the use of larger tires without a suspension lift, while the repositioned sway bar tab decreases stress on sway bar links.
Reinforced Ball Joints Brackets
With a 130% increase in the ball joint mounting area, our reinforced brackets are built to withstand the torque from portals and large tires, reducing the risk of bracket failure.
Note: This kit includes a complete APEXX heavy duty tie rod kit.
